VSM (SAS) / Sprayable Recovery Bonding Plaster

• For surface preparation before applying PGP or SPG materials
• For weak and porous vertical surfaces
• Provides excellent grip
• Frost and moisture resistant
• For outdoor and indoor work
• Cement based

Processing

Surface preparation

• The old plaster must be removed at least 100 cm above the visible border of salt efflorescence
• Moisture migration to the surface must be prevented
• Loose masonry joints must be cleaned to a depth of at least 20 mm, then filled with SAKRET SP-G
• If there are coatings on the surface that have a negative effect on adhesion and surface quality, they must be removed mechanically with a high-pressure washer or sandblasting
• Quality ventilation must be ensured when working indoors!

Usage

• No more than 50% of the surface of the plane to be restored should be covered with the material SAKRET VSM
• Joints and seams must not be filled with SAKRET VSM
• Protect the newly applied material from strong wind, direct sunlight, rain and freezing
• The material that has started to bind should not be diluted with water, but mixed again
• Hardened mass can only be cleaned mechanically

Instructions

• Protect the packaging from weather conditions, store on wooden pallets, in a cool and dry place, cover torn packaging immediately
• Contains cement, reacts alkaline
• Protect skin and eyes, follow technical instructions. If the mortar gets into the eyes, rinse with a large amount of water, if necessary, consult a doctor

Packing

• 30 kg / paper bags / 42 bags on a pallet

Tehnical data