Menu
thumbSakret

SFP / Rough facade lime filler

  • For the restoration of historical buildings;
  • Can be used in SAKRET recovery and historical plastering systems as a final finishing layer;
  • For indoor and outdoor work;
  • High vapor permeability;
  • Frost and moisture resistant;
  • Can be felted;
  • The cement content does not exceed 4%.

Processing

Preparation of the foundation:

  • The foundation must be dry, firm and without cracks. Clean the foundation from less durable and/or separable layers, as well as from dust, dirt, oils, paint residues, etc. adhesion-reducing dirt
  • Before filling, the surface must be primed with the deep primer SAKRET TGW

Processing:

  • To prepare filler, mix the dry mixture in a clean container with cold water until a homogeneous mass of the required consistency without lumps is formed;
  • After the ripening time, mix again;
  • Apply the prepared mixture on the surface with a spatula and level it evenly;
  • To obtain a smooth surface texture, the applied filler should be smoothed using grater with a rubber pad (felting method).

Packing

  • 20 kg / paper bags / 16 gab. on the pallet

Tehnical data

ConsumptionMaximum fraction sizeAchieving full hardnessFire safety classStorage time
1,3 kg/m²/1mm≤ 0,5 mmAfter 28 daysEuroclass A1 (non-flammable)24 months
Back to Top