PM Super / Cement-lime mortar

  • Lime / cement basis
  • Strength class - M5
  • Excellent adhesion to all types of mineral surfaces
  • Especially suitable for wet rooms
  • For masonry, plastering and repair works
  • Excellent mechanical strength
  • In grey or white colour
  • High water vapor permeability


  • The base must be dry and firm, all cracks and voids must be filled
  • Blocks or bricks must be clean and dry
  • Clean the substrate from less persistent and/or separable layers
  • Particularly dense and/or smooth foundations should be treated with an abrasive material
  • Surfaces with strong water absorption must be primed with SAKRET BG primer or SAKRET UG primer (diluted in a ratio of 1:3)
  • Especially smooth concrete surfaces should be primed with SAKRET QG primer
  • Mix SAKRET PM Super in a clean container with cold water until a homogeneous mass without lumps is formed
  • It is recommended to use a mixer with 600 turns per minute
  • After the ripening time (~3 minutes) mix again
  • The technical data refers to a temperature of +20°C and 50% relative air humidity. Lower temperature increases, higher - decreases the specified values
  • During the hardening phase of the mortar, protect from the sun, drafts and excessively high temperatures (>30°C)
  • Protect fresh adhesive from rain and too rapid drying
  • When the mortar has started to bind, no more water can be added!
  • Wash containers and tools with water immediately after making the mortar
  • Hardened mortar can only be removed mechanically
  • Contains cement, reacts alkaline
  • Protect skin and eyes, follow technical instructions. If the mortar gets into the eyes, rinse with a large amount of water, if necessary, consult a doctor
  • Protect the packaging from weather conditions, store on wooden pallets, in a cool and dry place, cover torn packaging immediately


  • 5 kg / paper bags / 60 bags on a pallet
  • 25kg / paper bags / 48 bags on a pallet
  • 40kg / paper bags / 36 bags on a pallet

Tehnical data

Volume of ready mortar (40 kg)Strength classDrying for 1mm plaster layerAchieving full hardnessConsumptionFire safety classStorage timeCompliant with the standardGrain sizeVolume of ready mortar (25 kg)
~ 26 lCS III24 hAfter 28 days~16 kg/m² (if the thickness of the layer is 10mm)Euro class A1 (non-flammable)12 monthsLVS EN 998-1≤1 mm~ 16 l
Back to Top