PG-F/ Primer before decorative plastering (for work in lower temperature conditions)

  • With drying-accelerating additives at reduced temperatures
  • Reduces the consumption of decorative plasters
  • With adhesion-enhancing additives
  • Strengthens the base
  • Water vapor permeable
  • Smoothens and reduces water absorption
  • Resistant to atmospheric effects
  • Expressly in white colour / tintable


Surface preparation

  • The surface must be clean, stable and dry
  • The bases must not be covered with frost, ice or snow and the surface temperature ≥2°C
  • Clean the base from less persistent and separable layers
  • Treat old / crumbling surfaces with SAKRET TGW primer before applying SAKRET PG F


  • Mix the primer thoroughly before use
  • Can be used on various surfaces before applying decorative plasters
  • On the material SAKRET BAK-F, which has been applied at reduced temperatures, use the primer SAKRET PG-F no sooner than 7 days after applying the reinforcing layer on the surface
  • When using tinted decorative plasters, we recommend tinting the primer SAKRET PG-F
  • Plasters may be applied after complete drying of the primer (~24h at low temperatures)
  • The material can be used if the outside air temperature is 0°C to +20°C and the temperature will not drop below -6°C within the next 8 hours.

Tehnical data

Chemical composition: organic solvent-free water polymer dispersion with fillers and additives
Drying time at 23 °C and relative humidity 50%: 4 h
Packaging: 25 kg/metal bucket
ColourDensity, g/cm³pHQuantity of GOS (V°C) in grams per liter (g/l)Consumption per m²Storage time
White / tintable1,55 ± 0,0510 - 1120,2 - 0,7 kg/m212 months
Back to Top