LC / Light compound for floors / light concrete

For installing of light, heat-insulating and sound-insulating floors
For creating a light, heat-insulating and sound-insulating layer under covers
For the creation of light, heat-insulating and sound-insulating vertical non-bearing structures
For filling various cavities when high mechanical strength of the material is not required

The surface must be firm, durable and without cracks
Free the surface from loose surface layers and separable layers
Particularly dense and/or smooth foundations should be treated with an abrasive material
Absorbent surfaces must be primed with the primer SAKRET UG diluted with water in a ratio of 1:3
Use non-absorbent or weakly absorbent forms in the creation of vertical structures; treat them with form oil before concreting
Mix SAKRET LC in a clean container with cold water until a homogeneous mass without lumps is formed
When installing the floor, pour the mass on the prepared surface and level it
In constructions with large surface areas, the intervals of deformation joints must be observed
The material that has started to harden must not be diluted with water!
About 21 litres of mixture can be obtained from 15 kg of SAKRET LC

Maximum filler fraction	Compressive strength after 28 days	Thermal conductivity rate	Consumption	Fire safety class	Storage time
> 8 mm	≥ 5 N/mm²	0,1 W/m*K	~75 kg / m² of dry mixture if layer thickness is 100 mm	Euroclass A1 (non-flammable)	12 months