KS / Water dispersion silicate paint for mineral surfaces

  • Painting of concrete, lime, lime-cement plaster, bricks, blocks and other mineral surfaces
  • Ecologically clean
  • Non-combustible
  • Weatherproof
  • Maintain surface water vapour permeability (breathable)
  • Does not contribute to the formation of a population of micro-organisms
  • Shades of light (bases A, B and C)
  • We recommend that you choose tones from the “Sakret DESIGN” and “Sakret Color Guide with KSG” tone map


  • The paint can be applied to unpainted mineral surfaces as well as surfaces previously painted with lime, lime-cement, cement and silicate paints
  • It is not recommended to use on surfaces prepainted with alkid, acrylic, latex or silicone colours
  • Cover spaces other than for painting
  • Painting may be performed not earlier than 12 hours after priming with KS-G or KS-P primer
  • Full surface planes shall be covered in one step in such a way that no areas of paint coating are formed
  • Don't paint during rain and strong winds. Ambient air and surface temperature must be 5 °C, relative humidity 80%
  • Colour fresh concrete surfaces not earlier than 2-4 weeks


  • 2,7 l, 9 l / metal bucket

Tehnical data

Chemical composition: potassium silicate solution, water polymer dispersion, pigment, fillers and additives
Drying time at 23 °C and relative humidity 50%: the surface can be re-coloured after 12 h
pHDry residue, %Quantity of GOS (V°C) in grams per liter (g/l)ConsumptionStorage timeWater vapour permeability (ISO 7783-2)Water permeability (EN 1062-3)Tint / glossDensity, g/cm³Viscosity, P (Brookfield, LV4, 5 rpm)
10-11,555213 - 5 m²/l at single application24 monthsSd < 0,14 m, klase 1W > 0,5 кg/м2/st0,5, class 1White and tintable / fully matt1,34 - 1,50300 - 900
Back to Top