CLP+ / Cement / Lime Plaster

  • Strength class - CSII
  • For indoor and outdoor works
  • Especially suitable for wet rooms
  • Suitable for plastering of walls and ceilings in one or more layers
  • Excellent mechanical strength
  • In grey and white colour
  • Very plastic
  • High hydrophobicity and water vapor permeability


  • Mix SAKRET CLP+ in a clean container with cold water until a homogeneous mass without lumps is formed
  • It is recommended to use a mixer with 600 turns per minute
  • After the ripening time (~3 minutes) mix again
  • The base must be dry and firm, all cracks and voids must be filled
  • Clean the foundation from less steady and/or separable layers
  • Particularly dense and/or smooth substrates should be treated with an abrasive material
  • Surfaces with strong water absorption must be primed with SAKRET BG primer or SAKRET UG primer (diluted in a ratio of 1:3)
  • Especially smooth concrete surfaces should be primed with SAKRET QG primer
  • The technical data refers to the temperature of +20°C and 50% relative air humidity. Lower temperature increases, higher - decreases the specified values
  • During the hardening phase of the mortar, protect from the sun, drafts and excessively high temperatures (>30°C)
  • Protect fresh adhesive from rain and too rapid drying
  • When the mortar has started to bind, no more water can be added!
  • Wash containers and tools with water immediately after processing the mortar
  • Hardened mortar can only be removed mechanically
  • Contains cement, reacts alkaline
  • Protect skin and eyes, follow technical instructions. If the mortar gets into the eyes, rinse with a large amount of water, if necessary, consult a doctor
  • Protect the packaging from weather conditions, store on wooden pallets, in a cool and dry place, cover torn packaging immediately


  • 25 kg / paper bags / 48 bags on a pallet
  • 40kg / paper bags / 36 bags on a pallet

Tehnical data

Compliant with the standardGrain sizeVolume of ready mortar (25 kg)Volume of ready mortar (40 kg)Strength classDrying for 1mm plaster layerAchieving full hardnessConsumptionFire safety classStorage time
LVS EN 998-1≤1mm~ 18 l~ 29 lCS II1 day / no more than 14 days in totalAfter 28 days~15 kg/m² (if the thickness of the layer is 10mm)Euro class A1 (non-flammable)12 months
Back to Top