BH / Concrete floor / concrete with reduced water absorption

  • Concrete class C35
  • Intended for the production of concrete and reinforced concrete structures in hydrotechnical works, water drains and sewerage structures
  • Especially suitable for rooms with high humidity and high mechanical loads
  • Suitable for heated floors
  • Excellent mechanical and climatic resistance
  • High water resistance
  • Water and frost resistant


  • The surface must be firm, durable and without cracks
  • Clean the surface of less persistent and/or separable layers
  • Particularly dense and/or smooth foundations should be treated with an abrasive material
  • Follow all the preparation conditions of SAKRET BH indicated on the material package
  • When concreting, use non-absorbent or weakly absorbent forms
  • Provide a sufficient protective layer of reinforcement in reinforced concrete structures
  • For the surfaces of large horizontal structures, observe the intervals of deformation joints
  • Treat the moulds with mould oil
  • Place the concrete in the moulds evenly and seal
  • Apply the clone in the required layer thickness, seal, level and smooth
  • Do not fill the deformation joints with concrete!
  • The technical data refers to a temperature of +20°C and 50% relative air humidity. Lower temperature increases, higher - decreases the specified values
  • During the hardening phase of the mortar, protect from the sun, drafts and excessively high temperatures (>30°C)
  • Protect fresh adhesive from rain and too rapid drying
  • When the mortar has started to bind, no more water can be added!
  • Wash containers and tools with water immediately after processing the mortar
  • Hardened mortar can only be removed mechanically
  • Contains cement, reacts alkaline
  • Protect skin and eyes, follow technical instructions. If the mortar gets into the eyes, rinse with a large amount of water, if necessary, consult a doctor
  • Protect the packaging from weather conditions, store on wooden pallets, in a cool and dry place, cover torn packaging immediately


  • 40 kg / paper bags / 36 bags on a pallet
  • 1,000 kg / Big-Bag packaging / pre-ordered
  • 10,000 kg - 20,000 kg / mobile transport silo

Tehnical data

Strength classGrain sizeVolume of ready mortar (40 kg)ConsumptionFire safety classStorage time
C35≤12mm~ 19 l80 kg/m² (if the layer thickness is 40mm)Euroclass A1 (non-flammable)12 months
Back to Top