SMS / Ready – made decorative silicone – silicate plaster

• Combined plaster based on silicone and silicate binders
• Included in the certified insulation systems SAKRET ETICS EPS and SAKRET ETICS MW
• High hydrophobicity, easy to apply and plastic
• Reinforced with polypropylene fibres
• High mechanical resistance
• A curd type and raindrops / worm type
• mm, 1.5 mm, 2.0 mm fractions
• White and tintable

Processing 

Surface preparation

• The base must be dry and firm, all cracks and voids must be filled
• Clean the surface from loose and/or separable layers
• The base must be primed with SAKRET PG primer
• If the decorative plaster is applied on a highly absorbent surface, it must first be primed with the primer SAKRET TGW or SAKRET BG, then with SAKRET PG
• If the decorative plaster is tinted, we recommend using SAKRET PG tinted primer for priming the surface

Usage

• The containers and tools that will be used for mixing and developing the SAKRET SMS material must be clean and rust-free.
• Stir well before use
• The material is applied to the base with a stainless-steel trowel or spatula so that the thickness of the layer is equal to the grain size of the decorative plaster.
• Create the decorative surface structure with circular movements (for the structure of curd and worm) or vertical movements (for the structure of raindrops) - use a plastic grater

Packing

• 25 kg / plastic buckets / 16 buckets on a pallet

Tehnical data

Chemical composition: silicone resin, potassium silicate solution, synthetic reinforcing fibres, hydrophobizers, fillers, pigments and additives