GMS / Gas concrete and silicate block adhesives
- Cement base
- Strength class M10
- Excellent adhesion characteristics
- Adhesive and repair work
- To be used as repair compound
- Excellent mechanical and climatic stability
- Grey and white
Processing
Surface preparation
- Blocks must be clean and dry
- Clear the substrate from less persistent and/or separable layers
- Special water-absorbing bricks/blocks should be moistened
Usage
- Mix SAKRET GMS in a clean container with cold water until a homogeneous consistency mass without lumps is formed
- It is recommended to use a blender at 600 rpm
- After maturing time (~ 3 minutes), mix repeatedly
- Once the mortar has begun to bind, no more water should be added!
- Protect during the hardening phase from sun, draught and too high a temperature (> 30 °C)
- Protect fresh adhesive mortar from rain and excessive drying
Packing
- 25 kg/paper bags/48 bags per palette
- 1,000 kg/BigBag pack/pre-order
- 10 000 kg - 20 000 kg/mobile transport silo
Tehnical data
| Strength class (according to LVS EN 998-2) | Grain size | Volume of ready mortar (25 kg) | Drying for 1mm mortar layer | Achieving full hardness | Consumption | Fire safety class | Storage time |
|---|---|---|---|---|---|---|---|
| M10 | ≤0,6mm | ~ 18 l | 24 h | After 28 days | ~1,4 kg/m² (if the layer thickness is 1mm) | Euroclass A1 (non-flammable) | 12 months |
