DPC / Lime – cement paint

• Especially suitable for painting historical buildings, surfaces with damaged horizontal waterproofing and walls
• Ecologically clean
• Very high water vapor permeability
• Very high resistance to changes in humidity in the painted surface
• Suitable for different types of mineral surfaces
• Can be used on fresh concrete surfaces
• Resistant to climate change
• For new and previously painted surfaces
• Can be tinted with mineral pigments

Processing

• Clean the surface from grease, dirt, salts and microflora
• A very porous, loosely bound or chalky surface must be cleaned to a firm base
• If there are organic coatings or paints on the surface, they must be removed
• Do not use putties of organic binders!
• Fill damaged areas with SAKRET putty SFP or SAKRET LCC, depending on the surface to be painted
• A calcium-based detergent or water can be used to clean surfaces
• The surface to be painted must be dry and clean
• The surrounding glass, ceramic, clinker and metal surfaces must be carefully covered (lime paint has an alkaline effect)
• When starting painting, mix in such an amount of paint that it is enough to paint the entire plane from one corner of the building to the other
• Paint one plane in one day with the colour of one mixture
• When applying paint on surfaces of different textures, the visual effect can create the impression of differences in tone
• If the paint is applied to an unevenly dried surface, spots may appear in different areas that will not disappear later
• If the painted surface comes into contact with water during the drying process, spots and paint runoff may appear on the surface
• Paint the surface in 2 layers with 8 hours drying between layers
• Mix the dry paint with water until the consistency of fresh cream

Packing

• 10 kg / plastic bucket

Tehnical data