TCM / Two-component HYDRO-INSULATION

Complies with EN 1504-2 (coating (C) according to PI, MC and IR principles).

• Designed for vertical and horizontal waterproofing of buildings
• Can be used in rooms with increased humidity and for installation of waterproofing under tile finishing
• For indoor and outdoor work on solid mineral bases - concrete, porous concrete, brickwork, plaster (CSII and CSIII class), etc.
• Resistant to UV rays, frost resistant, forms a waterproofing coating.

Processing

Surface preparation

• The surface must be dry and firm, all cracks and voids must be filled
• Clean the base surface from less durable and/or removable layers

Usage

• Pour part of the liquid component (B) into a clean container and pour the dry component (A), mix, add the remaining liquid component (B) until a homogeneous mass of the required consistency without lumps is formed
• After the ripening time, ~3 min., mix again
• The ratio of components A:B = 2.5:1
• The material that has started to harden must not be re-mixed with the liquid component!
• Apply the prepared waterproofing with a trowel or brush
• The second layer is laid perpendicular to the first layer
• Process two-component waterproofing within 60 minutes
• The second layer is applied after about 4-6 hours, when the first layer has hardened and cannot be mechanically damaged
• Hardening time depends on temperature, air humidity and layer thickness
• The thickness of one layer is up to 2mm

Packing:

• 5 kg

Tehnical data