SAKRET 7 / Water dispersion acrylic paint for interior work

Matted
For painting new and previously painted plasterboard, plastered surfaces, plaster, concrete, brick, paintable wallpaper surfaces
Excellent coverage
Non-drip
Washable
White and tintable (A and C bases)
Ecologically clean

Before painting, prime the surface with SAKRET KG primer
Mix the paint thoroughly before use
The product must be spread evenly on the surface
When applying the first layer of paint on the surface, as well as using a sprayer to apply the paint, if necessary, the paint can be diluted with water (up to 10% of the volume)
It is recommended to apply undiluted paint on the surface for the final finishing coat
The temperature of the surface to be painted and the surrounding air during painting and drying should be between +7°C and +25°C, relative air humidity ≤80%. If the temperature in the room is too high or there is a draft, a low-quality paint film may form
When using the product for ceiling painting, painting should be done in the direction of light

Chemical composition	Tint / gloss	Density, g/cm³	Viscosity, P (Brookfield, LV4, 50rpm)	Dry residue, %	Quantity of GOS (V°C) in grams per liter (g/l)	Drying time at 23°C and 50% relative humidity	Consumption	Storage time	Wet-scrub resistance (ISO 11998/ EN 13300)
Aqueous polymer dispersions, pigments, fillers and additives	White and tintable / fully matt	1,20 - 1,40	40 - 80	55	1	Re-paint after 3h	4 - 10 m²/l (depending on surface)	24 months	9 µm (28 days, 200 cycles), class 2