PGP / Levelling thick layer plaster

• For filling of surface cavities
• For repairing of crumbled areas
• For surfaces with a high concentration of salts
• Frost and moisture resistant
• Cement based
• Layer thickness 10 - 40mm
• For vertical surfaces
• For external and internal works

Processing 

Surface preparation

• If there are coatings on the surface that have a negative effect on adhesion and surface quality, they must be removed with a high-pressure washer or sandblasting
• Before applying SAKRET VSM, fill old seams and cracks with SAKRET SP-G
• Before applying SAKRET PGP, the surface must be treated with the adhesion material SAKRET VSM
• If necessary, tests should be carried out on a small surface area
• Quality ventilation must be ensured when working indoors!

Usage

• It is used for surface repair and preparation before the application of recovery plaster SP-G
• Layer thickness >40 mm using multi-layer application method
• Mechanically process freshly applied material as little as possible, otherwise the content of air pores in the material may decrease
• For mixing of PGP use tools and equipment designed for the preparation of this type of material
• Protect the newly applied material from strong wind, direct sunlight, rain and freezing
• The material that has started to bind should not be diluted with water, but mixed again
• Hardened mass can only be cleaned mechanically

Instructions

• Protect the packaging from weather conditions, store on wooden pallets, in a cool and dry place, cover torn packaging immediately
• Contains cement, reacts alkaline
• Protect skin and eyes, follow technical instructions. If the mortar gets into the eyes, rinse with a large amount of water, if necessary, consult a doctor

Packing

• 25 kg / paper bags / 42 bags on a pallet

Tehnical data