FM / Water dispersion acrylic facade paint

Acrylic paint modified with siloxane
For concrete, plastered, masonry, brick, reinforced concrete panels, etc. surfaces
Ecologically clean
Excellent coverage
Resistant to atmospheric effects
High water vapor permeability
Repels water and dirt
Protects the surface from exposure to CO₂
For new and previously painted surfaces
White and tintable (A and C bases)
We recommend choosing tones from the "Sakret DESIGN" and "Sakret COLOR GUIDE" tone cards

Mix the paint thoroughly before use
Clean previously unpainted surfaces from dust, dirt, salts, using a wire brush or a high-pressure sand-water jet
Paint fresh concrete surfaces no earlier than after 28 days
Clean previously painted surfaces of peeling paint, prepare them like new ones
Before painting, prime the surface with primer concentrate SAKRET FM G diluted with water in a ratio of 1:3. Apply as much primer as the surface can absorb
For the first layer, the paint can be diluted with water (up to 10% of the volume)
Siloxane, which is part of the paint, provides optimal protection against moisture, while ensuring high vapor permeability
Do not paint in strong winds. The temperature of the surface to be painted and the surrounding air during painting and drying should be ≥+5°C and the relative humidity of the air ≤80%

Chemical composition: water polymer dispersion, pigments, fillers and additives

Drying time at 23 °C and relative humidity 50%: the surface can be re-coloured after 12 h

Storage time	Tint / gloss	Density, g/cm³	pH	Solids content, %	Quantity of GOS (V°C) in grams per liter (g/l)	Water vapour permeability (ISO 7783-2)	Consumption	Water permeability (EN 1062-3)
24 months	White and tintable / Completely matte	1,35 - 1,50	8 - 9	58	7	Sd < 0,14 m, class 1	4 - 8 m²/l at single application	w < 0,1 kg/m² /√ 24 st., class 3