BE / Concrete floor / concrete (C25)

• Concrete class C25
• Designed for the production of concrete and reinforced concrete structures
• Excellent mechanical and climatic resistance
• Water and frost resistant

Processing

• The surface must be firm, durable and without cracks
• Clean the surface of less persistent and/or separable layers
• Particularly dense and/or smooth foundations should be treated with an abrasive material
• Follow all the preparation conditions of SAKRET BE indicated on the material package
• When concreting, use non-absorbent or weakly absorbent forms
• Provide a sufficient protective layer of reinforcement in reinforced concrete structures
• For the surfaces of large horizontal structures, observe the intervals of deformation joints
• Treat the moulds with mould oil
• Place the concrete in the moulds evenly and seal
• Apply the clone in the required layer thickness, seal, level and smooth
• Do not fill the deformation joints with concrete!
• The technical data refers to a temperature of +20°C and 50% relative air humidity. Lower temperature increases, higher - decreases the specified values
• During the hardening phase of the mortar, protect from the sun, drafts and excessively high temperatures (>30°C)
• Protect fresh adhesive from rain and too rapid drying
• When the mortar has started to bind, no more water can be added!
• Wash containers and tools with water immediately after processing the mortar
• Hardened mortar can only be removed mechanically
• Contains cement, reacts alkaline
• Protect skin and eyes, follow technical instructions. If the mortar gets into the eyes, rinse with a large amount of water, if necessary, consult a doctor
• Protect the packaging from weather conditions, store on wooden pallets, in a cool and dry place, cover torn packaging immediately

Packing

• 25 kg / paper bags / 48 bags on a pallet
• 40 kg / paper bags / 36 bags on a pallet
• 1,000 kg / Big-Bag packaging / pre-ordered
• 10,000 kg - 20,000 kg / mobile transport silo

Tehnical data