EB 08 / BASE PROFILE 0.8MM

Base profile including a drip ledge used for horizontal set-up of thermal insulating plates in the contact insulation system – ETICS.

Material:

Advantages-application:

Horizontal set-up of insulation material;
Dripping edge guarantee the water drains in a vertical direction from the bottom of the ETICS structure;
System protection against mechanical damage;
Rainwater draining off the system, prevention of any capillary rise under insulation material.

Installation tips:

Place the base profile to the wall, align with a spirit-level and mark places to drill holes for anchors;
Do not use impact drilling for hollow bricks to prevent inner brick partitions from breaking - the anchor would not hold in the masonry;
Insert the anchor through the hole in the profile into the predrilled, sufficiently deep and clean hole in the masonry;
Fix the profile by hammering a steel screw in the anchor;
To prevent the profile from distorting due to uneven masonry, use spacers for installation;
Base profiles are joined to one another using base profile joint units.